Cat® Stump Grinders are designed to economically remove stumps in residential, commercial and agricultural settings. They offer increased production over tow-behind grinders in situations where multiple stump removal is required. The right balance of cutting wheel speed and torque makes quick work of most tree varieties.
Dimensions
- Required Hydraulics
- High Flow XPS
- Cutting Wheel Diameter - With Teeth
- 21.5in
- Cutting Depth - Below Ground
- 20.5in
- Cutting Head Extension
- 11in
- Cutting Head Speed at Maximum Flow
- 1230 rpm
- Cutting Head Swing Range
- 70 degrees
- Cutting Height - Above Ground
- 18.5in
- Cutting Wheel Width - With Teeth
- 3.3in
- Cutting Width - Full Swing Range
- 60in
- Drive Method
- Gerotor Motor- Direct
- Drive Shaft Torque at Maximum Pressure
- 345.9lb/ft
- Motor Displacement
- 6.1in³
- Optimal Hydraulic Pressure
- 207-310 bar (3000-4500 psi)
- Overall Height
- 32in
- Overall Length
- 68.4in
- Overall Width
- 46.3in
- Optimal Hydraulic Flow
- 95-125 L/min (25-33 gpm)
- Weight
- 881.8lb
- Number of Carbide Teeth per Cutting Wheel
- 32
Standard Equipment:
Optional Equipment:
Specifications
Dimensions
- Required Hydraulics
- High Flow XPS
- Cutting Wheel Diameter - With Teeth
- 21.5in
- Cutting Depth - Below Ground
- 20.5in
- Cutting Head Extension
- 11in
- Cutting Head Speed at Maximum Flow
- 1230 rpm
- Cutting Head Swing Range
- 70 degrees
- Cutting Height - Above Ground
- 18.5in
- Cutting Wheel Width - With Teeth
- 3.3in
- Cutting Width - Full Swing Range
- 60in
- Drive Method
- Gerotor Motor- Direct
- Drive Shaft Torque at Maximum Pressure
- 345.9lb/ft
- Motor Displacement
- 6.1in³
- Optimal Hydraulic Pressure
- 207-310 bar (3000-4500 psi)
- Overall Height
- 32in
- Overall Length
- 68.4in
- Overall Width
- 46.3in
- Optimal Hydraulic Flow
- 95-125 L/min (25-33 gpm)
- Weight
- 881.8lb
- Number of Carbide Teeth per Cutting Wheel
- 32