Cat® Augers are used for drilling holes for footings, fencing, signs, trees and shrubs in construction, agricultural, and landscaping applications. They are designed with the right amount of speed and torque for maximum productivity in a broad range of soil types.
Dimensions
- Drive Shaft Torque at Maximum Pressure
- 3038.8lb/ft
- Drive Method
- Gerotor Motor - Single Planetary Reduction
- Mounting Bracket Design
- 3 Ton Mini Excavator Pin On
- Required Hydraulics
- Standard Flow
- Optimal Hydraulic Flow
- 42-83 L/min (11-22 gpm)
- Optimal Hydraulic Pressure
- 145-235 bar (2100-3400 psi)
- Overall Width - With Bracket
- 11.8in
- Overall Length - With Bracket
- 11.1in
- Overall Height
- 34.4in
- Housing Diameter
- 11in
- Swing Range (fore/aft)
- 72 degrees
- Swing Range (L/R)
- 76 degrees
- Weight
- 202.8lb
- Motor Displacement
- 15.26in³
- Bit Speed at Maximum Flow
- 71 rpm
- Hex Output Shaft Size
- 2in
Standard Equipment:
Optional Equipment:
Specifications
Dimensions
- Drive Shaft Torque at Maximum Pressure
- 3038.8lb/ft
- Drive Method
- Gerotor Motor - Single Planetary Reduction
- Mounting Bracket Design
- 3 Ton Mini Excavator Pin On
- Required Hydraulics
- Standard Flow
- Optimal Hydraulic Flow
- 42-83 L/min (11-22 gpm)
- Optimal Hydraulic Pressure
- 145-235 bar (2100-3400 psi)
- Overall Width - With Bracket
- 11.8in
- Overall Length - With Bracket
- 11.1in
- Overall Height
- 34.4in
- Housing Diameter
- 11in
- Swing Range (fore/aft)
- 72 degrees
- Swing Range (L/R)
- 76 degrees
- Weight
- 202.8lb
- Motor Displacement
- 15.26in³
- Bit Speed at Maximum Flow
- 71 rpm
- Hex Output Shaft Size
- 2in