The Cat?� C32 Industrial Power Unit is offered with a ratings of 746 bkW (1000 bhp) @ 1800 rpm. This rating meets U.S. EPA Tier 4 Final emission standards. Applications powered by C32 engines include: Bore/Drill Rigs, Chippers/Grinders, Construction, Cranes, Dredgers, Forestry, Hydraulic Power Units, General Industrial, Irrigation Equipment, Material Handling, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.
Power Rating
- Maximum Power
- 1000HP
- Maximum Torque
- 3825lb-ft @ 1200 rpm
- Rated Speed
- 1800 rpm
- Minimum Power
- 1000HP
Emission Standards
- Emissions
- U.S. EPA Tier 4 Final and EU Stage V
General
- Engine Configuration
- V-12
- Cycle
- 4
- Bore
- 5.7in
- Stroke
- 6.4in
- Displacement
- 1958.9in³
- Compression Ratio
- 16.0:1
- Aspiration
- Twin Turbocharged Aftercooled (TTA)
- Combustion System
- Direct Injection
- Cooling System
- liquid
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC
Power Unit Dimensions
- Height
- 77.6in
- Length
- 100.7in
- Width
- 64.4in
Standard Equipment:
- Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
- Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
- Flywheels And Flywheel Housing
- Choice of SAE No. 0 or SAE No. 1 flywheel housing
- Fuel System
- MEUI injection
- Fuel filter, secondary (2 micron)
- Electronic fuel priming
- Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Rear sump oil pan
- Oil dipstick
- Gear driven oil pump
Optional Equipment:
Specifications
Power Rating
- Maximum Power
- 1000HP
- Maximum Torque
- 3825lb-ft @ 1200 rpm
- Rated Speed
- 1800 rpm
- Minimum Power
- 1000HP
Emission Standards
- Emissions
- U.S. EPA Tier 4 Final and EU Stage V
General
- Engine Configuration
- V-12
- Cycle
- 4
- Bore
- 5.7in
- Stroke
- 6.4in
- Displacement
- 1958.9in³
- Compression Ratio
- 16.0:1
- Aspiration
- Twin Turbocharged Aftercooled (TTA)
- Combustion System
- Direct Injection
- Cooling System
- liquid
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC
Power Unit Dimensions
- Height
- 77.6in
- Length
- 100.7in
- Width
- 64.4in
Standard/Optional Features
Standard Equipment:
- Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
- Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
- Flywheels And Flywheel Housing
- Choice of SAE No. 0 or SAE No. 1 flywheel housing
- Fuel System
- MEUI injection
- Fuel filter, secondary (2 micron)
- Electronic fuel priming
- Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Rear sump oil pan
- Oil dipstick
- Gear driven oil pump