New 140 GC Motor Grader 178052

The Cat^® 140 GC Motor Grader is easy to own and operate. A demand fan and standard Eco mode reduces fuel consumption while open access to maintenance points makes service quick and simple. Control the blade with consistent movement using lever controls from the comfort of the all new cab. Not all features available in all regions. Consult your Cat dealer for specific configurations available in your region.

Engine Power (ISO 14396)

196 hp

Operating Weight - Typically Equipped

38,725 lb

Blade Width

12 ft

Bore

4.1 in

Share: Print: Download PDF:

Engine

Engine Power (ISO 14396): 196 hp
Bore: 4.1 in
Derating Altitude: 9,842 ft
Displacement: 427.8 in³
Emissions: U.S. EPA Tier 4 Final/EU Stage V
Engine Model: Cat 7.1
Engine RPM: 2,200
Standard Capability: 109 °F
High - Ambient Capability: 122 °F
Maximum Torque - ISO 9249: 616 lb/ft
Stroke: 5.3 in
Torque Rise - ISO 9294: 40%
Number of Cylinders: 6
Note (1): Net power is tested per ISO 9,249, SAE J1,349, and EEC 80/1,269 standards in effect at the time of manufacture.
Note (2): Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Note (3): Power as declared per ISO 14,396
Engine Power AWD (ISO 14396): 196 hp

Weights

Operating Weight - Typically Equipped: 38,725 lb
Note: *Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.

Moldboard

Blade Width: 12 ft
Arc Radius: 16.3 in
Blade Height: 24 in
Cutting Edge Width: 6 in
End Bit: 6 in
Throat Clearance: 4.4 in

Dimensions

Width All Wheel Drive (AWD): 99.3 in
Length of Machine*: 406.7 in
Maximum Height: 132.4 in
Width: 95.6 in
Note: *Typically equipped with push block and ripper.

Blade Range

Circle Center Shift Left: 29.6 in
Circle Center Shift Right: 28.7 in
Maximum Depth of Cut: 28.1 in
Maximum Lift Above Ground: 18.7 in
Maximum Shoulder Reach Left: 74.3 in
Maximum Shoulder Reach Right: 71.3 in
Moldboard Side Shift Left: 25.6 in
Moldboard Side Shift Right: 20.7 in
Blade Tip Range Backward: 5
Blade Tip Range Forward: 40

Service Refill Capacities

Fuel Tank: 78 gal (US)
Circle Drive with Slip Clutch: 2 gal (US)
Circle Drive without Slip Clutch: 0.5 gal (US)
Cooling System: 40 l
Engine Crankcase: 5.5 gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only): 4.2 gal (US)
Hydraulic System: 11.9 gal (US)
Transmission: 4.8 gal (US)

Weight

Weight (Tier 4 Final)**: 40,488 lb
All-Wheel Drive Weight (AWD) (Stage V)*: 40,543 lb
All-wheel Drive Weight (AWD) (Tier 4 Final)**: 42,119 lb

Air Conditioning System

Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1,234yf. See the label or instruction manual for identification of the gas.

Specifications