C15 Generator Set 11181

Standard Equipment:

• Air Inlet

  • Air cleaner

• Air System

  • Turbocharger
  • Air cleaner - Non canister disposable paper filter
  • Aftercooler core

• Control Panel

  • GCCP 1.3
  • GCCP 1.3 Genset Controller

• Cooling

  • Package mounted radiator

• Cooling System

  • Caterpillar extended life coolant
  • Fan drive, battery charging alternator drive
  • Radiator and cooling fan with guard
  • Coolant drain line with valve

• Exhaust

  • Base, formed steel with single wall integral 8-hour fuel tank
  • Standard open set fuel tank/base supplied
  • Exhaust flange outlet

• Fuel

  • Secondary fuel filters
  • Primary fuel filter with integral water separator
  • Fuel priming pump

• Fuel System

  • Primary fuel filter w/integral water separator and secondary filter
  • Fuel priming pump
  • Engine fuel transfer pump
  • Flexible fuel lines
  • Fuel cooler

• Generator

  • Matched to the performance and output characteristics of Cat engines
  • Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
  • IP23 Protection

• Power Termination

  • Busbar

• Generator And Attachments

  • Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
  • Integrated voltage regulator (IVR)
  • Segregated low voltage (AC/DC) wiring panel
  • Optional LC Frame generator - IP23 Protection
  • Power center, IP22
  • A Frame generator - IP21 Protection

• Mounting

  • Rubber vibration isolators

• Governing System

  • Cat electronic governor (ADEM A4).

• Lube System

  • Oil cooler
  • Oil drain valves

• Mounting System

  • Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines

• Starting/charging

  • 24 Volt battery with rack and cables
  • 24 volt starting motor
  • Batteries

• General

  • Engine and alternator pre paint, Caterpillar yellow
  • Paint - Caterpillar yellow except rails and radiators gloss black

Optional Equipment:

• Air Inlet System

  • Single element air cleaner
  • Dual element air cleaner

• Exhaust

  • Industrial, residential, critical mufflers

• Certifications

  • EU Certificate of Conformance (CE)
  • Global certification for CIS

• Circuit Breakers

  • Shunt trip for IEC circuit breaker
  • Padlockable circuit breaker device
  • 4 Pole (IEC-100% rated) Circuit breakers - Motorised
  • Auxiliary contacts, circuit breaker
  • 3 Pole (IEC-100% rated) Circuit breakers - Motorised
  • 3 Pole (IEC-100% rated) Circuit breakers - Package mounted
  • 4 Pole (IEC-100% rated) Circuit breakers - Package mounted
  • Power terminal strip

• Generator

  • Oversize and premium generators
  • Anti-condensation heater
  • Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)

• Power Termination

  • Circuit breakers, UL listed
  • Circuit breakers, IEC compliant

• Control Panels

  • GCCP 1.4
  • Volt free contacts
  • Local annunciator
  • Remote annunciator module
  • Local alarm horn
  • Oil temperature displays
  • Protective devices: Earth fault relay ; Earth leakage Ground fault relay ; Overload shutdown via breaker ; Low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor

• Starting/charging

  • Jacket water heater
  • Charging alternator
  • Heavy duty starting system
  • Battery chargers
  • Oversize batteries

• Cooling System

  • Stone guards
  • Radiator duct flange
  • Low coolant temperature alarm

• Enclosures

  • Sound attenuated enclosures
  • High ambient sound attenuated enclosures

• General

  • Sound attenuated, weather protective or high ambient weather protective enclosure
  • CSA Certification
  • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
  • EEC Declaration of Conformity
  • Integral & sub-base UL listed dual wall fuel tanks
  • Automatic transfer switches (ATS)
  • Single or dual wall sub-base fuel tanks
  • The following options are based on regional and product configuration:
  • EU Certificate of Conformance (CE)
  • Single or dual wall integral fuel tanks
  • Narrow, wide or skid base
  • UL 2200 package

• Exhaust System

  • Engine mounted muffler
  • End in/end out mufflers - 10, 25 and 35 dBA attenuation
  • 6 and 8 inch elbow kit
  • Manifold and turbocharger guards
  • Flexible exhaust fittings
  • 6 and 8 inch flange GP

• Fuel System

  • Manual fuel transfer pump
  • Dual wall fuel tank base
  • Fuel transfer system controls

• Generator And Attachments

  • Space heaters
  • Permanent magnet excitation (PMG) generator
  • Ingress protection
  • LC frame generator
  • Oversize A Frame generator
  • LC frame CIP generator
  • CIP A Frame generator
  • Oversize LC frame generator

• Lube System

  • Manual sump pump

• Mounting System

  • Narrow skid base - replaces standard fuel tank base

• Special Test / Reports

  • PGS Test report @ 1.0 power factor
  • PGS Test report @ 0.8 power factor

• Starting / Charging System

  • 5 Amp single Battery charger
  • Battery disconnect switch
  • Jacket water heater