The Cat?� 3516E industrial diesel engine is offered at a continuous rating of 1566 kW (2100 hp) @ 1650 rpm and is designed for applications that require continuous heavy-duty service. These engines are capable of being operated at maximum power and speed up to 100% of the time without interuption or load cycling.
The 3516E is certified to meet EU Stage V, U.S. EPA Tier 4 Final, and California Air Regulations Board (CARB) standards, providing a single solution for higher regulated countries and simplifying installations for OEMs.
The 3516E offers unsurpassed performance and durability in a wide array of industries and applications, including shredders, chippers, grinders, bore and drill rigs, and pumps as well as other applications in forestry, general industrial, material handling, and mining.
|
|
|
|
|
|
|
|
Power Rating
- Maximum Power
- 2,100 hp
- Maximum Torque
- 8,275 lb-ft @ 1200 rpm
- Rated Speed
- 1,650 rpm
- Minimum Power
- 2,100 hp
Emission Standards
- Emissions
- U.S. EPA Tier 4 Final, EU Stage V
General
- Engine Configuration
- V-16
- Bore
- 6.7 in
- Stroke
- 8.5 in
- Displacement
- 4,760 in³
- Compression Ratio
- 16.5:1
- Aspiration
- Turbocharged Aftercooled (TTA)
- Combustion System
- MEUI
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- SCR
Engine Dimensions - Approximate
- Length
- 122.2 in
- Width
- 63.6 in
- Height
- 83 in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 18,025 lb
Aftertreatment Dimensions
- Length
- 92.5 in
- Width
- 79.1 in
- Height
- 31.9 in
- Weight
- 2,378 lb
Standard Equipment:
-
- Air Inlet System
-
- Four turbochargers, centre mounted
- Air-to-Air Aftercooled (ATAAC)
-
- Control System
-
- Electronic engine control
-
- Exhaust System
-
- Two exhaust outlets, 203 mm (8 in) round flange
- Exhaust manifold, dry
- Four turbochargers with watercooled bearings
-
- Cooling System
-
- Gear-driven centrifugal jacket water pump
- Connections for radiator cooling
- Thermostats and housing
-
- Flywheels And Flywheel Housing
-
- Flywheel housing, SAE No. 0 or SAE No. 00
- Flywheel, SAE No. 18 or SAE No. 21
- SAE standard rotation
-
- Fuel System
-
- Fuel filter, LH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors
-
- Lube System
-
- Crankcase breather, top mounted
- Oil cooler
- Oil filler and dipstick, LH
- Oil pump
- Oil filter, LH, spin-on type
- Front sump oil pan, 500-hour change interval
-
- General
-
- Paint: Caterpillar yellow, with optional colors available at request
- Vibration damper
- Lifting eyes
Optional Equipment:
Specifications
Power Rating
- Maximum Power
- 2,100 hp
- Maximum Torque
- 8,275 lb-ft @ 1200 rpm
- Rated Speed
- 1,650 rpm
- Minimum Power
- 2,100 hp
Emission Standards
- Emissions
- U.S. EPA Tier 4 Final, EU Stage V
General
- Engine Configuration
- V-16
- Bore
- 6.7 in
- Stroke
- 8.5 in
- Displacement
- 4,760 in³
- Compression Ratio
- 16.5:1
- Aspiration
- Turbocharged Aftercooled (TTA)
- Combustion System
- MEUI
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- SCR
Engine Dimensions - Approximate
- Length
- 122.2 in
- Width
- 63.6 in
- Height
- 83 in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 18,025 lb
Aftertreatment Dimensions
- Length
- 92.5 in
- Width
- 79.1 in
- Height
- 31.9 in
- Weight
- 2,378 lb
Standard/Optional Features
Standard Equipment:
-
- Air Inlet System
-
- Four turbochargers, centre mounted
- Air-to-Air Aftercooled (ATAAC)
-
- Control System
-
- Electronic engine control
-
- Exhaust System
-
- Two exhaust outlets, 203 mm (8 in) round flange
- Exhaust manifold, dry
- Four turbochargers with watercooled bearings
-
- Cooling System
-
- Gear-driven centrifugal jacket water pump
- Connections for radiator cooling
- Thermostats and housing
-
- Flywheels And Flywheel Housing
-
- Flywheel housing, SAE No. 0 or SAE No. 00
- Flywheel, SAE No. 18 or SAE No. 21
- SAE standard rotation
-
- Fuel System
-
- Fuel filter, LH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors
-
- Lube System
-
- Crankcase breather, top mounted
- Oil cooler
- Oil filler and dipstick, LH
- Oil pump
- Oil filter, LH, spin-on type
- Front sump oil pan, 500-hour change interval
-
- General
-
- Paint: Caterpillar yellow, with optional colors available at request
- Vibration damper
- Lifting eyes
Optional Equipment: