Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 906 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles.
|
|
|
|
|
|
|
|
Engine
- Maximum Gross Power
- 74.7 hp
- Engine Model
- Cat C2.8*
- Maximum Engine Speed
- 2,550 rpm
- Maximum Gross Power - Rated Engine Speed
- 2,400 r/min
- Maximum Gross Power - SAE J1995
- 74.7 hp
- Maximum Gross Power - ISO 14396
- 74.3 hp
- Maximum Gross Power - ISO 14396 (metric)
- 75.3 mhp
- Rated Net Power - Rated Engine Speed
- 2,400 r/min
- Rated Net Power - SAE J1349
- 72.7 hp
- Rated Net Power - ISO 9249
- 72.1 hp
- Rated Net Power - 2,400 rpm - ISO 9249 (metric)
- 73.1 mhp
- Maximum Gross Torque - SAE J1995
- 222 lb/ft
- Maximum Gross Torque - ISO 14396
- 221 lb/ft
- Maximum Net Torque - SAE J1349
- 218 lb/ft
- Maximum Net Torque - ISO 9249
- 217 lb/ft
- Displacement
- 171 in³
- Bore
- 3.54 in
- Stroke
- 4.33 in
- Note
- Advertised power is tested per the specified standard in effect at the time of manufacture.
- Note (1)
- Net power advertised is the power available at the flywheel.
- Note (2)
- *Two Cat C2.8 engine emission options are available: 1) Meets U.S. EPA Tier 4 Final, EU Stage V. 2) U.S. EPA Tier 3 and EU Stage IIIA equivalent. Tier 3 engine specs are 0.3 kW/0.4 hp more gross power (SAE J1,995), 0.2 kW/0.3 hp on net power (SAE J1,349) an
- Note (3)
- #Maximum gross and net torque measured at 1,600 rpm.
Weights
- Operating Weight
- 12,628 lb
Buckets
- Bucket Capacities
- 0.75-1.55 m³ (1.0-2.0 yd³)
- Bucket Capacities - General Purpose
- 0.80-1.35 m³ (1.0-1.7 yd³)
- Bucket Capacities - Light Material
- 1.25-1.55 m³ (1.6-2.0 yd³)
- Multi-Purpose
- 0.75-1.1 m³ (1.0-1.4 yd³)
- Note
- Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
- Note (1)
- Bucket capacities stated include BOCE, in line with ISO 7,546.
Sustainability
- Recyclability
- 93%
Service Refill Capacities
- Fuel Tank
- 18.5 Gal
- Cooling System
- 3.2 Gal
- Engine Crankcase
- 2.3 Gal
- Axles - Front Center Differential
- 2.3 Gal
- Axles - Rear Center Differential
- 2.3 Gal
- Hydraulic System - Including Tank
- 17.8 Gal
- Hydraulic Tank
- 11.8 Gal
- Transmission
- 0.6 Gal
- Note
- No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.
Axles
- Front
- Fixed (standard) Locking Differential (optional)
- Rear
- Fixed (standard) Locking Differential (optional)
- Note
- Oscillation of ±11 degrees via hitch between front and rear frames.
Steering
- Steering Articulation Angle - Each Direction
- 39 °
- Maximum Flow - Steering Pump
- 12.3 gal/min
- Maximum Working Pressure - Steering Pump
- 3,336 psi
- Steering Cycle Times – (full left to full right) – at High Idle
- 2.8 s
- Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
- 3.25 turns or 4.00 turns
Tires
- Tire Size - Standard
- *405/70 R18 SPT9
- Tire Size - Optional
- 405/70 R18 Powerloads
- Tire Size - Optional (1)
- 340/80 R18 XMCL/Bibload
- Tire Size - Optional (2)
- 340/80 R18 TRI 2
- Tire Size - Optional (3)
- 40X14-20 TL, SM/TR
- Tire Size - Optional 4
- 340/80 R18 Duraforce
- Note
- *This tire has been used for all dimension, stability and performance data.
- Note (1)
- Other tire choices are available. Contact your Cat dealer for details.
- Note (2)
- In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
- Note (3)
- Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Cab
- ROPS
- ISO 3,471:2,008
- FOPS
- ISO 3,449:2,005 Level II
- Note (1)
- Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.
Dimensions - With SSL Coupler - Approximate
- Height - Ground to Cab
- 8.08 ft
- Height: Ground to Beacon**
- 8.67 ft
- Height: Ground Axle Center**
- 1.58 ft
- Height - Ground Clearance
- 1 ft
- Length - Overall with Bucket
- 18.17 ft
- Length: Rear Axle to Bumper
- 4.58 ft
- Length: Hitch to Front Axle
- 3.58 ft
- Length - Wheel Base
- 7.08 ft
- Clearance - Bucket at 45°
- 7.83 ft
- Clearance: Load over Height**
- 9.5 ft
- Clearance - Level Bucket
- 9.92 ft
- Height - Bucket Pin
- 10.67 ft
- Height: Overall**
- 13.83 ft
- Reach - Bucket at 45°
- 2.67 ft
- Carry Height: Bucket Pin
- 1.17 ft
- Dig Depth
- 0.25 ft
- Width - Bucket
- 6.17 ft
- Width - Tread Center
- 4.67 ft
- Turning Radius - Over Bucket
- 14.67 ft
- Width - Over Tires
- 6.07 ft
- Turning Radius: Outside of Tires
- 12.92 ft
- Turning Radius - Inside Tire
- 6.75 ft
- Rack Angle at Full Lift
- 51°
- Dump Angle at Full Lift
- 50°
- Rack Angle at Carry
- 46°
- Departure Angle - Degrees
- 30°
- Articulation Angle - Degrees
- 39°
- Operating Weight: Bucket ^
- 12,863 lb
- Tipping Load – Straight – ISO 14397-1 †
- 8,613 lb
- Tipping Load – Full Turn – ISO 14397-1 †
- 7,220 lb
- Operating Weight: Carriage and Tines ^^
- 12,434 lb
- Tipping Load - Straight †
- 7,359 lb
- 80% of Tip: Firm and Level EN474-3 ††
- 4,970 lb
- Note (1)
- *Vary with bucket
- Note (2)
- **Vary with tire
- Note (3)
- ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 0.95 m3 (1.2 yd3) general purpose bucket.
- Note (4)
- ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1,220 mm (4 ft) tines (500 mm [20 in] load center).
- Note (5)
- †Full compliance to ISO 14,397-1 (2,007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
- Note (6)
- ††Full compliance to EN474-3 and SAE J1,197.
- Note (7)
- #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
- Note (8)
- Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9EM 405/70 R18 tires and 0.95 m3 (1.2 yd3) general purpose bucket with bolt-on cutting edge or a class
- Note (9)
- Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.
- Tipping Load - Full Turn †
- 2,818 kg
- Length: Front Axle to Front of Coupler
- 4.33 ft
Transmission
- Forward and Reverse - Speed Range Creep#
- 6 mile/h
- Forward and Reverse - Speed Range 1*
- 6 mile/h
- Forward and Reverse - Speed Range 2** - High Speed
- 10.5 mile/h
- Forward and Reverse - Speed Range 2** - Standard
- 12 mile/h
- Forward and Reverse - Speed Range 3***
- 25 mile/h
- Note
- #Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).
- Note (1)
- *Creep function not available in this gear or above.
- Note (2)
- **Max speed dependent on model and configuration (standard vs. high speed transmission).
- Note (3)
- ***Reverse is 30 km/h (19 mph).
Loader Hydraulic System
- Main Relief - 1st Auxiliary (3rd slice)
- 3,408 psi
- Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*
- 21 gal/min
- Main Relief - 1st Auxiliary (3rd slice) - High Flow*
- 32 gal/min
- Main Relief - 2nd Auxiliary (4th slice)
- 3,408 psi
- Main Relief - 2nd Auxiliary (4th slice) - Flow
- 12 gal/min
- Hydraulic Cycle Time - Rackback
- 2.2 s
- Hydraulic Cycle Time - Lift
- 5 s
- Hydraulic Cycle Time - Dump
- 1.6 s
- Hydraulic Cycle Time - Float Down
- 2.8 s
- Note
- * Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.
Dimensions - With HPL-V Coupler - Approximate#
- Height: Ground to Cab**
- 8.08 ft
- Height: Ground to Beacon**
- 8.67 ft
- Height: Ground Axle Center**
- 1.58 ft
- Height: Ground Clearance**
- 1 ft
- Length: Overall*
- 17.58 ft
- Length: Rear Axle to Bumper
- 4.58 ft
- Length: Hitch to Front Axle
- 3.58 ft
- Length: Wheel Base
- 7.08 ft
- Clearance: Bucket at 45° *
- 8.25 ft
- Clearance: Load over Height**
- 9.5 ft
- Clearance: Level Bucket**
- 9.92 ft
- Height: Bucket Pin**
- 10.67 ft
- Height: Overall**
- 13.5 ft
- Reach: Bucket at 45° *
- 2.42 ft
- Carry Height: Bucket Pin
- 1.08 ft
- Dig Depth**
- 0.33 ft
- Width: Bucket
- 6.17 ft
- Width: Tread Center
- 4.67 ft
- Turning Radius: Over Bucket
- 14.17 ft
- Width: Over Tires
- 6.08 ft
- Turning Radius: Outside of Tires
- 12.92 ft
- Turning Radius: Inside of Tires
- 6.75 ft
- Rack Angle at Full Lift
- 56°
- Dump Angle at Full Lift
- 45°
- Rack Angle at Carry
- 51°
- Departure Angle - Degrees
- 30°
- Articulation Angle - Degrees
- 39°
- Operating Weight: Bucket ^
- 12,632 lb
- Tipping Load - Straight - ISO 14397-1 †
- 9,760 lb
- Tipping Load - Full Turn - ISO 14397-1 †
- 8,225 lb
- Operating Weight: Carriage and Tines ^^
- 12,240 lb
- Tipping Load - Straight †
- 7,748 lb
- 80% of Tip: Firm and Level EN474-3 ††
- 5,211 lb
- Note (1)
- *Vary with bucket
- Note (2)
- **Vary with tire
- Note (3)
- ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 0.95 m3 (1.2 yd3) general purpose bucket.
- Note (4)
- ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1,220 mm (4 ft) tines (500 mm [20 in] load center).
- Note (5)
- †Full compliance to ISO 14,397-1 (2,007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
- Note (6)
- ††Full compliance to EN474-3 and SAE J1,197.
- Note (7)
- #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
- Note (8)
- Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9EM 405/70 R18 tires and 0.95 m3 (1.2 yd3) general purpose bucket with bolt-on cutting edge or a class
- Note (9)
- Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.
- Length: Front Axle to Front of Coupler
- 3.5 ft
- Tipping Load - Full Turn †
- 6,514 lb
Standard Equipment:
-
- Electrical
-
- Product Link™
- Service (Electronic Technician™)
- Lights, roading, front halogen
- Lights, rear stop and turn, LED
- Cab mounted fuse panel
- Battery disconnect switch
- Battery, heavy duty, 12V, 90Ah and 1,000 CCA
- Alternator, 100 amp sealed
-
- Hydraulics
-
- Motor, single drive with dedicated implement and steering pumps
- Multi-function lift and tilt with loader arm float
- Joystick, single lever, single auxiliary roller
- Implement valve, pressure compensated
- Hystat displacement pump, infinitely variable
- Caterpillar HYDO™ Advanced 10 hydraulic oil
- Coupler/pin on attachment ready
- Demand cooling fan, hydraulically driven
- Dead engine lower, lift valve, manual
- Electro-hydraulic, fully proportional controls
- Hydraulic pilot shut off switch, in cab
-
- Operator Environment
-
- Cab
– Doors (2), fixed glass
– Wipers, front and rear, full front coverage
– Windshield, front single piece
– Window, rear heated
– Radio ready, speakers and wiring
– Air vents, (4) screen, (7) directional
– Heating, mechanical control unit
– Sun visor, solid, front full width
– Interior light (incandescent) - Seat, manual height adjustment, (cab) fabric with adjustable left arm rest, (canopy) vinyl
- Joystick, seat mounted, standard multifunction
– FNR, auxiliary roller, speed range select, continuous flow, differential lock, horn
– Arm rest, padded right, multiple position vertical height - Display, analog and digital
– Gauges (2), hydraulic oil, engine coolant
– Digital with soft touch buttons – fuel level, speed range, speedometer, service hour meter, service/maintenance information, hydraulic and power train performance and aggressiveness settings, security passcode (multiple languages) - ROPS/FOPS certified canopy/cab
– 12V power outlets, interior/exterior
– Pedals, raised, foot, brake/inching, accelerator
– Lever, parking brake
– Cup holders (2)
– CB radio clip, phone holder
– Door release, internal (left and right)
– Hook, large, coat and hard hat
– Floormat, heavy duty, easy clean
– Mirrors, (2) external breakaway, (1) internal
– Operator station on isolation mounts
– Steering wheel, spinner knob, horn in center
– Seat belt, orange, retractable, 51 mm (2 in)
– Storage, personal (trays [3], seat pocket)
– Steering column, tilt adjusted
– Column mounted multi function control: lights, roading, wipers, self cancelling turn signals
– Quick coupler switch, in cab
- Cab
-
- Other
-
- Scheduled Oil Sampling (S·O·S℠) ports, engine oil and hydraulic oil
- Recovery hitch with pin
- Paint, Electro-Coat primer, gloss topcoat
- Machine lifting/tie down points
- Lockable, fuel cap, HVAC filters, nose cone
- Lockable main and side engine enclosures
- Loader arm safety brace
- Ground level easy access daily service points
- Fenders, front and rear
-
- Power Train
-
- Fuel pump, priming (manual)/water separator/drain
- Engine oil, ECO drain tap and hose
- Engine, auto idle shutdown, hibernation mode
- Drive shaft, sealed for life, universal joints
- Coolant, extended life, –36° C (–33° F)
- Closed circuit breather
- Axles, heavy duty, frame mounted with outboard planetary reduction
- Air cleaner, two stage filter, with in cab audio/visual indicator on display
- Cat C2.8 engine
– Diesel particulate filter (Fit for Life) or muffler (Dependent on regional regulations.)
– Fuel, diesel, ultra low or low Sulphur (Dependent on regional regulations.)
– Hydrostatic transmission, two speed, with inching function, “shift on the go”
– Power train mode, hystat - Emissions compliant, two options (Dependent on regional regulations.)
– U.S. EPA Tier 4 Final and EU Stage V
– U.S. EPA Tier 3 and EU Stage IIIA equivalent
Optional Equipment:
-
- Electrical
-
- Work tool wiring harness, (3) in cab switches
- Push to start
- Lighting packages, multiple; front, rear, engine bay (LED or HAL)
-
- Hydraulics
-
- Quick disconnect auxiliary hydraulics
- Reversing fan
- Ride Control or load check valves (Dependent on regional regulations.)
- Connect under pressure and case drain
- Caterpillar Bio HYDO Advanced hydraulic oil
- Auxiliary flow, single standard (3) valve, single high flow (3) valve, dual high flow (4) valve
-
- Operator Station
-
- USB ports (2), interior
- Sun visor, rear perforated
- Storage, lockable box or lockable cooled box
- Soft touch keypad options, 8 or 16 button
- Secondary display, front or rear view camera
- Seat packages; deluxe or premium
- Seat belt options, multiple
- Radio, FM or digital audio broadcast
- Phone holder, spring loaded
- Mirrors (2) electronically adjustable, heated external, plus lower parabolic mirror
- Joystick, seat mounted, multifunction
- Interior light, door activated
- FNR, twin auxiliary roller, continuous flow, differential lock, horn
- Doors, sliding windows (left and right)
- Air Conditioning, automatic temperature control (ATC)
-
- Other
-
- Rotary sensors (snubbing, kickouts, parallel)
- Couplers, vertical (SSL), horizontal (HPL-V, HPL-A)
-
- Power Train
-
- Power train mode, utility (includes keypad)
- Hydrostatic transmission, 3-speed, “shift on the go”, secondary steering and boosted brakes
- Fuel pump, priming (Higher regulated countries), electric (Dependent on regional regulations.)
- Creep and throttle lock function
- Cold start – jacket water heater, bypass valve
- Antifreeze, extended life coolant, –50° C (–58° F)
Specifications
Engine
- Maximum Gross Power
- 74.7 hp
- Engine Model
- Cat C2.8*
- Maximum Engine Speed
- 2,550 rpm
- Maximum Gross Power - Rated Engine Speed
- 2,400 r/min
- Maximum Gross Power - SAE J1995
- 74.7 hp
- Maximum Gross Power - ISO 14396
- 74.3 hp
- Maximum Gross Power - ISO 14396 (metric)
- 75.3 mhp
- Rated Net Power - Rated Engine Speed
- 2,400 r/min
- Rated Net Power - SAE J1349
- 72.7 hp
- Rated Net Power - ISO 9249
- 72.1 hp
- Rated Net Power - 2,400 rpm - ISO 9249 (metric)
- 73.1 mhp
- Maximum Gross Torque - SAE J1995
- 222 lb/ft
- Maximum Gross Torque - ISO 14396
- 221 lb/ft
- Maximum Net Torque - SAE J1349
- 218 lb/ft
- Maximum Net Torque - ISO 9249
- 217 lb/ft
- Displacement
- 171 in³
- Bore
- 3.54 in
- Stroke
- 4.33 in
- Note
- Advertised power is tested per the specified standard in effect at the time of manufacture.
- Note (1)
- Net power advertised is the power available at the flywheel.
- Note (2)
- *Two Cat C2.8 engine emission options are available: 1) Meets U.S. EPA Tier 4 Final, EU Stage V. 2) U.S. EPA Tier 3 and EU Stage IIIA equivalent. Tier 3 engine specs are 0.3 kW/0.4 hp more gross power (SAE J1,995), 0.2 kW/0.3 hp on net power (SAE J1,349) an
- Note (3)
- #Maximum gross and net torque measured at 1,600 rpm.
Weights
- Operating Weight
- 12,628 lb
Buckets
- Bucket Capacities
- 0.75-1.55 m³ (1.0-2.0 yd³)
- Bucket Capacities - General Purpose
- 0.80-1.35 m³ (1.0-1.7 yd³)
- Bucket Capacities - Light Material
- 1.25-1.55 m³ (1.6-2.0 yd³)
- Multi-Purpose
- 0.75-1.1 m³ (1.0-1.4 yd³)
- Note
- Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
- Note (1)
- Bucket capacities stated include BOCE, in line with ISO 7,546.
Sustainability
- Recyclability
- 93%
Service Refill Capacities
- Fuel Tank
- 18.5 Gal
- Cooling System
- 3.2 Gal
- Engine Crankcase
- 2.3 Gal
- Axles - Front Center Differential
- 2.3 Gal
- Axles - Rear Center Differential
- 2.3 Gal
- Hydraulic System - Including Tank
- 17.8 Gal
- Hydraulic Tank
- 11.8 Gal
- Transmission
- 0.6 Gal
- Note
- No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.
Axles
- Front
- Fixed (standard) Locking Differential (optional)
- Rear
- Fixed (standard) Locking Differential (optional)
- Note
- Oscillation of ±11 degrees via hitch between front and rear frames.
Steering
- Steering Articulation Angle - Each Direction
- 39 °
- Maximum Flow - Steering Pump
- 12.3 gal/min
- Maximum Working Pressure - Steering Pump
- 3,336 psi
- Steering Cycle Times – (full left to full right) – at High Idle
- 2.8 s
- Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
- 3.25 turns or 4.00 turns
Tires
- Tire Size - Standard
- *405/70 R18 SPT9
- Tire Size - Optional
- 405/70 R18 Powerloads
- Tire Size - Optional (1)
- 340/80 R18 XMCL/Bibload
- Tire Size - Optional (2)
- 340/80 R18 TRI 2
- Tire Size - Optional (3)
- 40X14-20 TL, SM/TR
- Tire Size - Optional 4
- 340/80 R18 Duraforce
- Note
- *This tire has been used for all dimension, stability and performance data.
- Note (1)
- Other tire choices are available. Contact your Cat dealer for details.
- Note (2)
- In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
- Note (3)
- Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Cab
- ROPS
- ISO 3,471:2,008
- FOPS
- ISO 3,449:2,005 Level II
- Note (1)
- Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.
Dimensions - With SSL Coupler - Approximate
- Height - Ground to Cab
- 8.08 ft
- Height: Ground to Beacon**
- 8.67 ft
- Height: Ground Axle Center**
- 1.58 ft
- Height - Ground Clearance
- 1 ft
- Length - Overall with Bucket
- 18.17 ft
- Length: Rear Axle to Bumper
- 4.58 ft
- Length: Hitch to Front Axle
- 3.58 ft
- Length - Wheel Base
- 7.08 ft
- Clearance - Bucket at 45°
- 7.83 ft
- Clearance: Load over Height**
- 9.5 ft
- Clearance - Level Bucket
- 9.92 ft
- Height - Bucket Pin
- 10.67 ft
- Height: Overall**
- 13.83 ft
- Reach - Bucket at 45°
- 2.67 ft
- Carry Height: Bucket Pin
- 1.17 ft
- Dig Depth
- 0.25 ft
- Width - Bucket
- 6.17 ft
- Width - Tread Center
- 4.67 ft
- Turning Radius - Over Bucket
- 14.67 ft
- Width - Over Tires
- 6.07 ft
- Turning Radius: Outside of Tires
- 12.92 ft
- Turning Radius - Inside Tire
- 6.75 ft
- Rack Angle at Full Lift
- 51°
- Dump Angle at Full Lift
- 50°
- Rack Angle at Carry
- 46°
- Departure Angle - Degrees
- 30°
- Articulation Angle - Degrees
- 39°
- Operating Weight: Bucket ^
- 12,863 lb
- Tipping Load – Straight – ISO 14397-1 †
- 8,613 lb
- Tipping Load – Full Turn – ISO 14397-1 †
- 7,220 lb
- Operating Weight: Carriage and Tines ^^
- 12,434 lb
- Tipping Load - Straight †
- 7,359 lb
- 80% of Tip: Firm and Level EN474-3 ††
- 4,970 lb
- Note (1)
- *Vary with bucket
- Note (2)
- **Vary with tire
- Note (3)
- ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 0.95 m3 (1.2 yd3) general purpose bucket.
- Note (4)
- ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1,220 mm (4 ft) tines (500 mm [20 in] load center).
- Note (5)
- †Full compliance to ISO 14,397-1 (2,007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
- Note (6)
- ††Full compliance to EN474-3 and SAE J1,197.
- Note (7)
- #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
- Note (8)
- Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9EM 405/70 R18 tires and 0.95 m3 (1.2 yd3) general purpose bucket with bolt-on cutting edge or a class
- Note (9)
- Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.
- Tipping Load - Full Turn †
- 2,818 kg
- Length: Front Axle to Front of Coupler
- 4.33 ft
Transmission
- Forward and Reverse - Speed Range Creep#
- 6 mile/h
- Forward and Reverse - Speed Range 1*
- 6 mile/h
- Forward and Reverse - Speed Range 2** - High Speed
- 10.5 mile/h
- Forward and Reverse - Speed Range 2** - Standard
- 12 mile/h
- Forward and Reverse - Speed Range 3***
- 25 mile/h
- Note
- #Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).
- Note (1)
- *Creep function not available in this gear or above.
- Note (2)
- **Max speed dependent on model and configuration (standard vs. high speed transmission).
- Note (3)
- ***Reverse is 30 km/h (19 mph).
Loader Hydraulic System
- Main Relief - 1st Auxiliary (3rd slice)
- 3,408 psi
- Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*
- 21 gal/min
- Main Relief - 1st Auxiliary (3rd slice) - High Flow*
- 32 gal/min
- Main Relief - 2nd Auxiliary (4th slice)
- 3,408 psi
- Main Relief - 2nd Auxiliary (4th slice) - Flow
- 12 gal/min
- Hydraulic Cycle Time - Rackback
- 2.2 s
- Hydraulic Cycle Time - Lift
- 5 s
- Hydraulic Cycle Time - Dump
- 1.6 s
- Hydraulic Cycle Time - Float Down
- 2.8 s
- Note
- * Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.
Dimensions - With HPL-V Coupler - Approximate#
- Height: Ground to Cab**
- 8.08 ft
- Height: Ground to Beacon**
- 8.67 ft
- Height: Ground Axle Center**
- 1.58 ft
- Height: Ground Clearance**
- 1 ft
- Length: Overall*
- 17.58 ft
- Length: Rear Axle to Bumper
- 4.58 ft
- Length: Hitch to Front Axle
- 3.58 ft
- Length: Wheel Base
- 7.08 ft
- Clearance: Bucket at 45° *
- 8.25 ft
- Clearance: Load over Height**
- 9.5 ft
- Clearance: Level Bucket**
- 9.92 ft
- Height: Bucket Pin**
- 10.67 ft
- Height: Overall**
- 13.5 ft
- Reach: Bucket at 45° *
- 2.42 ft
- Carry Height: Bucket Pin
- 1.08 ft
- Dig Depth**
- 0.33 ft
- Width: Bucket
- 6.17 ft
- Width: Tread Center
- 4.67 ft
- Turning Radius: Over Bucket
- 14.17 ft
- Width: Over Tires
- 6.08 ft
- Turning Radius: Outside of Tires
- 12.92 ft
- Turning Radius: Inside of Tires
- 6.75 ft
- Rack Angle at Full Lift
- 56°
- Dump Angle at Full Lift
- 45°
- Rack Angle at Carry
- 51°
- Departure Angle - Degrees
- 30°
- Articulation Angle - Degrees
- 39°
- Operating Weight: Bucket ^
- 12,632 lb
- Tipping Load - Straight - ISO 14397-1 †
- 9,760 lb
- Tipping Load - Full Turn - ISO 14397-1 †
- 8,225 lb
- Operating Weight: Carriage and Tines ^^
- 12,240 lb
- Tipping Load - Straight †
- 7,748 lb
- 80% of Tip: Firm and Level EN474-3 ††
- 5,211 lb
- Note (1)
- *Vary with bucket
- Note (2)
- **Vary with tire
- Note (3)
- ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 0.95 m3 (1.2 yd3) general purpose bucket.
- Note (4)
- ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1,220 mm (4 ft) tines (500 mm [20 in] load center).
- Note (5)
- †Full compliance to ISO 14,397-1 (2,007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
- Note (6)
- ††Full compliance to EN474-3 and SAE J1,197.
- Note (7)
- #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
- Note (8)
- Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9EM 405/70 R18 tires and 0.95 m3 (1.2 yd3) general purpose bucket with bolt-on cutting edge or a class
- Note (9)
- Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.
- Length: Front Axle to Front of Coupler
- 3.5 ft
- Tipping Load - Full Turn †
- 6,514 lb
Standard/Optional Features
Standard Equipment:
-
- Electrical
-
- Product Link™
- Service (Electronic Technician™)
- Lights, roading, front halogen
- Lights, rear stop and turn, LED
- Cab mounted fuse panel
- Battery disconnect switch
- Battery, heavy duty, 12V, 90Ah and 1,000 CCA
- Alternator, 100 amp sealed
-
- Hydraulics
-
- Motor, single drive with dedicated implement and steering pumps
- Multi-function lift and tilt with loader arm float
- Joystick, single lever, single auxiliary roller
- Implement valve, pressure compensated
- Hystat displacement pump, infinitely variable
- Caterpillar HYDO™ Advanced 10 hydraulic oil
- Coupler/pin on attachment ready
- Demand cooling fan, hydraulically driven
- Dead engine lower, lift valve, manual
- Electro-hydraulic, fully proportional controls
- Hydraulic pilot shut off switch, in cab
-
- Operator Environment
-
- Cab
– Doors (2), fixed glass
– Wipers, front and rear, full front coverage
– Windshield, front single piece
– Window, rear heated
– Radio ready, speakers and wiring
– Air vents, (4) screen, (7) directional
– Heating, mechanical control unit
– Sun visor, solid, front full width
– Interior light (incandescent) - Seat, manual height adjustment, (cab) fabric with adjustable left arm rest, (canopy) vinyl
- Joystick, seat mounted, standard multifunction
– FNR, auxiliary roller, speed range select, continuous flow, differential lock, horn
– Arm rest, padded right, multiple position vertical height - Display, analog and digital
– Gauges (2), hydraulic oil, engine coolant
– Digital with soft touch buttons – fuel level, speed range, speedometer, service hour meter, service/maintenance information, hydraulic and power train performance and aggressiveness settings, security passcode (multiple languages) - ROPS/FOPS certified canopy/cab
– 12V power outlets, interior/exterior
– Pedals, raised, foot, brake/inching, accelerator
– Lever, parking brake
– Cup holders (2)
– CB radio clip, phone holder
– Door release, internal (left and right)
– Hook, large, coat and hard hat
– Floormat, heavy duty, easy clean
– Mirrors, (2) external breakaway, (1) internal
– Operator station on isolation mounts
– Steering wheel, spinner knob, horn in center
– Seat belt, orange, retractable, 51 mm (2 in)
– Storage, personal (trays [3], seat pocket)
– Steering column, tilt adjusted
– Column mounted multi function control: lights, roading, wipers, self cancelling turn signals
– Quick coupler switch, in cab
- Cab
-
- Other
-
- Scheduled Oil Sampling (S·O·S℠) ports, engine oil and hydraulic oil
- Recovery hitch with pin
- Paint, Electro-Coat primer, gloss topcoat
- Machine lifting/tie down points
- Lockable, fuel cap, HVAC filters, nose cone
- Lockable main and side engine enclosures
- Loader arm safety brace
- Ground level easy access daily service points
- Fenders, front and rear
-
- Power Train
-
- Fuel pump, priming (manual)/water separator/drain
- Engine oil, ECO drain tap and hose
- Engine, auto idle shutdown, hibernation mode
- Drive shaft, sealed for life, universal joints
- Coolant, extended life, –36° C (–33° F)
- Closed circuit breather
- Axles, heavy duty, frame mounted with outboard planetary reduction
- Air cleaner, two stage filter, with in cab audio/visual indicator on display
- Cat C2.8 engine
– Diesel particulate filter (Fit for Life) or muffler (Dependent on regional regulations.)
– Fuel, diesel, ultra low or low Sulphur (Dependent on regional regulations.)
– Hydrostatic transmission, two speed, with inching function, “shift on the go”
– Power train mode, hystat - Emissions compliant, two options (Dependent on regional regulations.)
– U.S. EPA Tier 4 Final and EU Stage V
– U.S. EPA Tier 3 and EU Stage IIIA equivalent
Optional Equipment:
-
- Electrical
-
- Work tool wiring harness, (3) in cab switches
- Push to start
- Lighting packages, multiple; front, rear, engine bay (LED or HAL)
-
- Hydraulics
-
- Quick disconnect auxiliary hydraulics
- Reversing fan
- Ride Control or load check valves (Dependent on regional regulations.)
- Connect under pressure and case drain
- Caterpillar Bio HYDO Advanced hydraulic oil
- Auxiliary flow, single standard (3) valve, single high flow (3) valve, dual high flow (4) valve
-
- Operator Station
-
- USB ports (2), interior
- Sun visor, rear perforated
- Storage, lockable box or lockable cooled box
- Soft touch keypad options, 8 or 16 button
- Secondary display, front or rear view camera
- Seat packages; deluxe or premium
- Seat belt options, multiple
- Radio, FM or digital audio broadcast
- Phone holder, spring loaded
- Mirrors (2) electronically adjustable, heated external, plus lower parabolic mirror
- Joystick, seat mounted, multifunction
- Interior light, door activated
- FNR, twin auxiliary roller, continuous flow, differential lock, horn
- Doors, sliding windows (left and right)
- Air Conditioning, automatic temperature control (ATC)
-
- Other
-
- Rotary sensors (snubbing, kickouts, parallel)
- Couplers, vertical (SSL), horizontal (HPL-V, HPL-A)
-
- Power Train
-
- Power train mode, utility (includes keypad)
- Hydrostatic transmission, 3-speed, “shift on the go”, secondary steering and boosted brakes
- Fuel pump, priming (Higher regulated countries), electric (Dependent on regional regulations.)
- Creep and throttle lock function
- Cold start – jacket water heater, bypass valve
- Antifreeze, extended life coolant, –50° C (–58° F)