The Cat?� C1.5 Industrial Diesel Engine is offered in rating 18.4 bkW (24.7 bhp) @ 1800 rpm and meet U.S. EPA Tier 4 Final emission standards. Industries and applications powered by C1.5 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers and Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Turf and Landscaping, Underground Mining Equipment and Welders.
Power Rating
- Maximum Power
- 24.6HP
- Maximum Torque
- 63.4lb-ft @ 1800 rpm
- Rated Speed
- 2200/2800 rpm
- Minimum Power
- 24.6HP
Emission Standards
- Emissions
- U.S. EPA Tier 4 Final
General
- Engine Configuration
- In-Line 3
- Bore
- 3.3in
- Stroke
- 3.5in
- Displacement
- 91in³
- Compression Ratio
- 22.5:1
- Aspiration
- Naturally Aspirated (NA)
- Combustion System
- Indirect Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
Engine Dimensions - Approximate
- Length
- 22.5in
- Width
- 17.9in
- Height
- 25.3in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 327lb
Standard Equipment:
- Air Inlet System
- Inlet manifold with choice of inlets.
- Control System
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
- Tier 4 Final: Alternator 12V 85 amp
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
- Flywheel & Flywheel Housing
- Naturally Aspirated: SAE No. 7 1/2 flywheel
- Naturally Aspirated: Choice of SAE No. 4 or standard backplate flywheel housing
- Fuel System
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
- Lube System
- Alternative oil fillers
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
- Power Take Off (pto)
- Provision for Power Take Off (PTO)
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
Optional Equipment:
Specifications
Power Rating
- Maximum Power
- 24.6HP
- Maximum Torque
- 63.4lb-ft @ 1800 rpm
- Rated Speed
- 2200/2800 rpm
- Minimum Power
- 24.6HP
Emission Standards
- Emissions
- U.S. EPA Tier 4 Final
General
- Engine Configuration
- In-Line 3
- Bore
- 3.3in
- Stroke
- 3.5in
- Displacement
- 91in³
- Compression Ratio
- 22.5:1
- Aspiration
- Naturally Aspirated (NA)
- Combustion System
- Indirect Injection
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
Engine Dimensions - Approximate
- Length
- 22.5in
- Width
- 17.9in
- Height
- 25.3in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 327lb
Standard/Optional Features
Standard Equipment:
- Air Inlet System
- Inlet manifold with choice of inlets.
- Control System
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
- Tier 4 Final: Alternator 12V 85 amp
- Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
- Flywheel & Flywheel Housing
- Naturally Aspirated: SAE No. 7 1/2 flywheel
- Naturally Aspirated: Choice of SAE No. 4 or standard backplate flywheel housing
- Fuel System
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
- Lube System
- Alternative oil fillers
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
- Power Take Off (pto)
- Provision for Power Take Off (PTO)
- General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous