The Cat ® D11 Dozer delivers higher productivity at lower cost — for a reduction of up to 6% in overall cost per bank cubic meter compared to the previous model. Infused with performance-enhancing features, the D11 helps you improve the efficiency of your dozing operation. The torque divider with stator clutch automatically frees up the stator when torque is not required, delivering higher drivetrain efficiency for reduced fuel consumption. High-horsepower reverse speeds up non-productive traveling to reduce cycle time, while load-sensing hydraulics deliver more power to the dozer, increasing responsiveness and boosting fuel efficiency. Advanced technologies are completely integrated into the dozer, creating smart machines and more informed operators to maximize the productivity of your operation.
|
|
|
|
|
|
|
|
Engine - U.S. EPA Tier 4 Final/EU Stage V
- Engine Model
- Cat® C32
- Engine Power - Net SAE J1349/ISO 9249 - Forward
- 850 hp
- Displacement
- 1,959 in³
- Engine Power - Net SAE J1349/ISO 9249 - Reverse
- 955 hp
- Note (1)
- *Excludes all fan losses.
- Note (2)
- Engine ratings apply at 1,800 rpm.
- Note (3)
- Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Weights
- Operating Weight
- 229,800 lb
- Operating Weight - Carrydozer
- 250,665 lb
- Note (1)
- D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
- Note (2)
- D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
Blades
- Semi-Universal (SU)* Capacity
- 35.6 yd³
- Semi-Universal (SU)* Width Over Endbits
- 219.8 in
- U-Blade Capacity
- 45 yd³
- U-Blade Width
- 249.6 in
- Reclamation Universal - Blade capacity (SAE J1265)
- 55 yd³
- Reclamation Universal - Width with blade (over end bits)
- 251.8 in
- Carry Dozer - Blade capacity (SAE J1265)
- 57 yd³
- Carry Dozer - Width with blade (over end bits)
- 263.9 in
Hydraulic Controls
- Pump Type
- Variable displacement piston pump
- Combined Pump Output - Implement
- 177 gal/min
Ripper - Single Shank
- Maximum penetration force * (shank vertical)
- 66,000 lb
- Maximum penetration depth (standard tip)
- 63.5 in
- Pryout Force
- 148,510 lb
Transmission
- 1.0 Forward
- 2.5 mile/h
- 2.0 Forward
- 4.4 mile/h
- 3.0 Forward
- 7.6 mile/h
- 1.0 Reverse
- 3 mile/h
- 2.0 Reverse
- 5.3 mile/h
- 3.0 Reverse
- 9.1 mile/h
- Drawbar Pull - 3 Forward
- 46,250 ft·lbf
- Drawbar Pull - 1 Forward
- 148,200 ft·lbf
- Drawbar Pull - 2 Forward
- 82,300 ft·lbf
Ripper - Single Shank, Deep Ripping
- Maximum penetration force * (shank vertical)
- 66,110 lb
- Maximum penetration depth (standard tip)
- 85.5 in
- Pryout Force
- 148,510 lb
Ripper - Multi-Shank, Adjustable Parallelogram
- Overall Beam Width
- 131.1 in
- Maximum Penetration Force - Shank Vertical
- 77,350 lb
- Maximum Penetration - Standard Tip
- 43.3 in
- Pry-Out Force - Multi-Shank Ripper with One Tooth
- 145,640 lb
Undercarriage
- Shoe Type
- Extreme Service
- Width - Shoe
- 28 in
- Width - Shoe - CD
- 36 in
- Shoes/Side
- 41
- Grouser Height
- 4 in
- Pitch
- 12.5 in
- Ground Clearance*
- 30.6 in
- Track Gauge
- 114 in
- Length - Track on Ground
- 175 in
- Ground Contact Area
- 9,781 in²
- Ground Contact Area - CD
- 12,605 in²
- Track Rollers/Side
- 8
- Number of Carrier Rollers
- 1 per side (optional)
Fuel Tank Capacities
- Fuel Tank - Total Volume
- 500 gal (US)
- Fuel Tank - Usable Volume
- 475 gal (US)
Dimensions - D11 Carrydozer
- Width at Outside of Track (710 mm Track Shoe)
- 149.8 in
- Length with SU-Blade** - No rear attachment
- 345.1 in
- Overall Length SU-Blade and SS Ripper**
- 421.7 in
Engine - U.S. EPA Tier 2 Equivalent
- Engine Model
- Cat® C32
- Displacement
- 1,959 in³
- Engine Power - Net SAE J1349/ISO 9249 - Forward
- 850 hp
- Engine Power - Net SAE J1349/ISO 9249 - Reverse
- 957 hp
- Note (1)
- *Excludes all fan losses.
- Note (2)
- Engine ratings apply at 1,800 rpm.
- Note (3)
- Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Standards
- ROPS
- Rollover Protective Structure (ROPS) meets the following criteria: ISO 3,471:2,008
- FOPS
- Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3,449:2,005 LEVEL II
- Sound (1)
- The exterior sound pressure level for the standard machine (ISO 6,396:2,008) is 116 dB(A) (sound suppressed).
- Sound (2)
- The operator equivalent sound pressure level (ISO 6,396:2,008) is 78 dB(A) (sound suppressed).
Dimensions - D11
- Ground Clearance*
- 31.4 in
- Track Gauge
- 114 in
- Width at Outside of Track (710 mm Track Shoe)
- 142 in
- Height (ROPS/canopy)*
- 185.9 in
- Length of Track on Ground
- 175 in
- Length with SU-Blade** - No rear attachment
- 337.8 in
- Overall Length SU-Blade and SS Ripper**
- 414.4 in
- Note
- *Includes grouser height for total dimensions on hard surfaces.
Service Refill Capacities
- Cooling System
- 46.8 gal (US)
- Cooling System Refill - Tier 2 Equivalent Engine
- 41.7 gal (US)
- Engine Crankcase
- 35.1 gal (US)
- Power Train
- 120 gal (US)
- Power Train - Refill Volume
- 103.3 gal (US)
- Final Drive - Each
- 12.4 gal (US)
- Roller Frames - Each
- 24.8 gal (US)
- Hydraulic Tank
- 42.2 gal (US)
- Hydraulic System Tank and Chassis
- 64.7 gal (US)
- Hydraulic System Chassis + Blade and Ripper (Standard)
- 117.6 gal (US)
- Hydraulic System Chassis + Blade and Ripper (Carrydozer)
- 143.4 gal (US)
Air Conditioning System
- Note (1)
- The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1,430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)
Standard Equipment:
-
- Operator Environment
-
- ROPS/FOPS, Sound-Suppressed Cab
- High-Definition Primary Touchscreen Display
- Visibility – Rearview Mirrors
- Air Conditioner and Heater with Automatic Climate Control
- Seat – Cloth with Air suspension
- Cab Glass – Single-Pane Tinted Safety
- Cab Access – Blade Push Arm Steps and Grab Handle
-
- Cat Technology Products
-
- VIMS
- Automated Blade Assist (ABA)
- Cat Product Link™ Elite (cellular)
-
- Cat Power Train
-
- Cat C32 Engine – U.S. EPA Tier 4 Final or Tier 2 Equivalent
- High-Performance Single-Plane Cooling Module
- Stator Clutch Torque Divider – Electronic Control
- Powershift Transmission – Three-Speed Electronic Shift
-
- Undercarriage
-
- Suspension Type Undercarriage
- Sleeve Bearing Track
- Lifetime-Lubricated Rollers and Idlers
- Track Shoe (ES): 710 mm (28 in) Width
-
- Hydraulics
-
- Electronically Controlled, Load-Sensing Dozer Lift and Tilt
- Electronically Controlled, Load-Sensing Ripper Lift and Pitch
- Dozer Blade – Dual Tilt
- Electronically Enabled Blade – Quick Drop
-
- Electrical
-
- 24V Electric Start, Dual Starters
- Batteries – 4 × 4,200-Amp Hour, 12V
- Battery Isolation
- Lights – Halogen – 13 Positions
-
- Service And Maintenance
-
- Ecology Fluid Drains – All Compartments
- Hinged Bottom Guards
- High-Speed Oil Change – Engine and Transmission
- Ground-Level Fast Fuel Fill
- Ground-Level Electrical Service Station
- S·O·SSM Fluid Sampling Ports
- Diagnostic Connector
Optional Equipment:
-
- Operator Environment
-
- MineStar™ Terrain Display
- Visibility – Dual Camera
- Visibility – Four Cameras, 360 Degree View
- Seat – Heated, Cooled, Adjustable Lumbar and Bolsters
- Cab Glass – Dual-Pane Laminated Impact Safety
- Cab Glass – High-Pressure Safety (40 psi/275 kPa)
- Cab Access – Powered Ladder
-
- Cat Technology Products
-
- AutoCarry™
- Auto Ripper Control
- Cat Terrain with 3D Blade Control
- Cat Terrain Ready
- Cat Product Link Elite Dual Mode (cellular + satellite)
- Cat Command for Dozing Ready
-
- Cat Power Train
-
- Hydraulic Cooling Fan – Automatic Reversing
-
- Undercarriage
-
- Track Shoes (ES): 810/915 mm (32/36 in) Width (various configurations)
- Track Links – High Abrasion – Tall Link
- Track Links – Heavy Duty XL – Duralink
- Track Shoe – Abrasion Resistant
- Track Shoe – Anti-Packing Round Hole
- Abrasion Rollers and Idlers
- Cold Weather Rollers and Idlers
- Sound Suppression Undercarriage
- Carrier Roller
-
- Hydraulics
-
- Carrydozer Hydraulics
- Dozer Extended Blade Pitch
- Ripper Pin Puller
-
- Electrical
-
- Battery Isolation – Dual Pole
- Lights – LED – Premium Package
-
- Service And Maintenance
-
- Sound Reduction Sealed Bottom Guards
- Ground-Level Fluid Fill and Drain
- Ripper Lubrication – Autolube with Ground-Level Fill
- Ripper Lubrication – Grouped – Ground-Level Fill
-
- Rear Attachments
-
- Ripper – Single Shank with Pin Puller
- Ripper – Single Shank Pushblock with Pin Puller
- Ripper – Single Shank with Pin Puller – Heavy
- Ripper – Multi Shank (three shank)
- Ripper – Multi Shank – Heavy (three shank)
- Ripper – Multi Shank Leach Pad with Pin Puller
- Ripper – Multi Shank – Coal (five shank)
- Counterweight – Rear
- Drawbar with Counterweight
-
- Blades
-
- Semi-Universal (27.2 m³/35.6 yd³)
- Universal (34.4 m³/45.0 yd³)
- Carrydozer (43.6 m³/57 yd³)
- Reclamation Universal (42 m³/55 yd³)
- Reclamation Universal (53.5 m³/70 yd³)
- Coal Universal (75 m³/98.0 yd³)
- Coal Universal (65 m³/85.5 yd³)
-
- Other
-
- Fire Suppression Ready
- Fire Suppression Installed
Specifications
Engine - U.S. EPA Tier 4 Final/EU Stage V
- Engine Model
- Cat® C32
- Engine Power - Net SAE J1349/ISO 9249 - Forward
- 850 hp
- Displacement
- 1,959 in³
- Engine Power - Net SAE J1349/ISO 9249 - Reverse
- 955 hp
- Note (1)
- *Excludes all fan losses.
- Note (2)
- Engine ratings apply at 1,800 rpm.
- Note (3)
- Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Weights
- Operating Weight
- 229,800 lb
- Operating Weight - Carrydozer
- 250,665 lb
- Note (1)
- D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
- Note (2)
- D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
Blades
- Semi-Universal (SU)* Capacity
- 35.6 yd³
- Semi-Universal (SU)* Width Over Endbits
- 219.8 in
- U-Blade Capacity
- 45 yd³
- U-Blade Width
- 249.6 in
- Reclamation Universal - Blade capacity (SAE J1265)
- 55 yd³
- Reclamation Universal - Width with blade (over end bits)
- 251.8 in
- Carry Dozer - Blade capacity (SAE J1265)
- 57 yd³
- Carry Dozer - Width with blade (over end bits)
- 263.9 in
Hydraulic Controls
- Pump Type
- Variable displacement piston pump
- Combined Pump Output - Implement
- 177 gal/min
Ripper - Single Shank
- Maximum penetration force * (shank vertical)
- 66,000 lb
- Maximum penetration depth (standard tip)
- 63.5 in
- Pryout Force
- 148,510 lb
Transmission
- 1.0 Forward
- 2.5 mile/h
- 2.0 Forward
- 4.4 mile/h
- 3.0 Forward
- 7.6 mile/h
- 1.0 Reverse
- 3 mile/h
- 2.0 Reverse
- 5.3 mile/h
- 3.0 Reverse
- 9.1 mile/h
- Drawbar Pull - 3 Forward
- 46,250 ft·lbf
- Drawbar Pull - 1 Forward
- 148,200 ft·lbf
- Drawbar Pull - 2 Forward
- 82,300 ft·lbf
Ripper - Single Shank, Deep Ripping
- Maximum penetration force * (shank vertical)
- 66,110 lb
- Maximum penetration depth (standard tip)
- 85.5 in
- Pryout Force
- 148,510 lb
Ripper - Multi-Shank, Adjustable Parallelogram
- Overall Beam Width
- 131.1 in
- Maximum Penetration Force - Shank Vertical
- 77,350 lb
- Maximum Penetration - Standard Tip
- 43.3 in
- Pry-Out Force - Multi-Shank Ripper with One Tooth
- 145,640 lb
Undercarriage
- Shoe Type
- Extreme Service
- Width - Shoe
- 28 in
- Width - Shoe - CD
- 36 in
- Shoes/Side
- 41
- Grouser Height
- 4 in
- Pitch
- 12.5 in
- Ground Clearance*
- 30.6 in
- Track Gauge
- 114 in
- Length - Track on Ground
- 175 in
- Ground Contact Area
- 9,781 in²
- Ground Contact Area - CD
- 12,605 in²
- Track Rollers/Side
- 8
- Number of Carrier Rollers
- 1 per side (optional)
Fuel Tank Capacities
- Fuel Tank - Total Volume
- 500 gal (US)
- Fuel Tank - Usable Volume
- 475 gal (US)
Dimensions - D11 Carrydozer
- Width at Outside of Track (710 mm Track Shoe)
- 149.8 in
- Length with SU-Blade** - No rear attachment
- 345.1 in
- Overall Length SU-Blade and SS Ripper**
- 421.7 in
Engine - U.S. EPA Tier 2 Equivalent
- Engine Model
- Cat® C32
- Displacement
- 1,959 in³
- Engine Power - Net SAE J1349/ISO 9249 - Forward
- 850 hp
- Engine Power - Net SAE J1349/ISO 9249 - Reverse
- 957 hp
- Note (1)
- *Excludes all fan losses.
- Note (2)
- Engine ratings apply at 1,800 rpm.
- Note (3)
- Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Standards
- ROPS
- Rollover Protective Structure (ROPS) meets the following criteria: ISO 3,471:2,008
- FOPS
- Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3,449:2,005 LEVEL II
- Sound (1)
- The exterior sound pressure level for the standard machine (ISO 6,396:2,008) is 116 dB(A) (sound suppressed).
- Sound (2)
- The operator equivalent sound pressure level (ISO 6,396:2,008) is 78 dB(A) (sound suppressed).
Dimensions - D11
- Ground Clearance*
- 31.4 in
- Track Gauge
- 114 in
- Width at Outside of Track (710 mm Track Shoe)
- 142 in
- Height (ROPS/canopy)*
- 185.9 in
- Length of Track on Ground
- 175 in
- Length with SU-Blade** - No rear attachment
- 337.8 in
- Overall Length SU-Blade and SS Ripper**
- 414.4 in
- Note
- *Includes grouser height for total dimensions on hard surfaces.
Service Refill Capacities
- Cooling System
- 46.8 gal (US)
- Cooling System Refill - Tier 2 Equivalent Engine
- 41.7 gal (US)
- Engine Crankcase
- 35.1 gal (US)
- Power Train
- 120 gal (US)
- Power Train - Refill Volume
- 103.3 gal (US)
- Final Drive - Each
- 12.4 gal (US)
- Roller Frames - Each
- 24.8 gal (US)
- Hydraulic Tank
- 42.2 gal (US)
- Hydraulic System Tank and Chassis
- 64.7 gal (US)
- Hydraulic System Chassis + Blade and Ripper (Standard)
- 117.6 gal (US)
- Hydraulic System Chassis + Blade and Ripper (Carrydozer)
- 143.4 gal (US)
Air Conditioning System
- Note (1)
- The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1,430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)
Standard/Optional Features
Standard Equipment:
-
- Operator Environment
-
- ROPS/FOPS, Sound-Suppressed Cab
- High-Definition Primary Touchscreen Display
- Visibility – Rearview Mirrors
- Air Conditioner and Heater with Automatic Climate Control
- Seat – Cloth with Air suspension
- Cab Glass – Single-Pane Tinted Safety
- Cab Access – Blade Push Arm Steps and Grab Handle
-
- Cat Technology Products
-
- VIMS
- Automated Blade Assist (ABA)
- Cat Product Link™ Elite (cellular)
-
- Cat Power Train
-
- Cat C32 Engine – U.S. EPA Tier 4 Final or Tier 2 Equivalent
- High-Performance Single-Plane Cooling Module
- Stator Clutch Torque Divider – Electronic Control
- Powershift Transmission – Three-Speed Electronic Shift
-
- Undercarriage
-
- Suspension Type Undercarriage
- Sleeve Bearing Track
- Lifetime-Lubricated Rollers and Idlers
- Track Shoe (ES): 710 mm (28 in) Width
-
- Hydraulics
-
- Electronically Controlled, Load-Sensing Dozer Lift and Tilt
- Electronically Controlled, Load-Sensing Ripper Lift and Pitch
- Dozer Blade – Dual Tilt
- Electronically Enabled Blade – Quick Drop
-
- Electrical
-
- 24V Electric Start, Dual Starters
- Batteries – 4 × 4,200-Amp Hour, 12V
- Battery Isolation
- Lights – Halogen – 13 Positions
-
- Service And Maintenance
-
- Ecology Fluid Drains – All Compartments
- Hinged Bottom Guards
- High-Speed Oil Change – Engine and Transmission
- Ground-Level Fast Fuel Fill
- Ground-Level Electrical Service Station
- S·O·SSM Fluid Sampling Ports
- Diagnostic Connector
Optional Equipment:
-
- Operator Environment
-
- MineStar™ Terrain Display
- Visibility – Dual Camera
- Visibility – Four Cameras, 360 Degree View
- Seat – Heated, Cooled, Adjustable Lumbar and Bolsters
- Cab Glass – Dual-Pane Laminated Impact Safety
- Cab Glass – High-Pressure Safety (40 psi/275 kPa)
- Cab Access – Powered Ladder
-
- Cat Technology Products
-
- AutoCarry™
- Auto Ripper Control
- Cat Terrain with 3D Blade Control
- Cat Terrain Ready
- Cat Product Link Elite Dual Mode (cellular + satellite)
- Cat Command for Dozing Ready
-
- Cat Power Train
-
- Hydraulic Cooling Fan – Automatic Reversing
-
- Undercarriage
-
- Track Shoes (ES): 810/915 mm (32/36 in) Width (various configurations)
- Track Links – High Abrasion – Tall Link
- Track Links – Heavy Duty XL – Duralink
- Track Shoe – Abrasion Resistant
- Track Shoe – Anti-Packing Round Hole
- Abrasion Rollers and Idlers
- Cold Weather Rollers and Idlers
- Sound Suppression Undercarriage
- Carrier Roller
-
- Hydraulics
-
- Carrydozer Hydraulics
- Dozer Extended Blade Pitch
- Ripper Pin Puller
-
- Electrical
-
- Battery Isolation – Dual Pole
- Lights – LED – Premium Package
-
- Service And Maintenance
-
- Sound Reduction Sealed Bottom Guards
- Ground-Level Fluid Fill and Drain
- Ripper Lubrication – Autolube with Ground-Level Fill
- Ripper Lubrication – Grouped – Ground-Level Fill
-
- Rear Attachments
-
- Ripper – Single Shank with Pin Puller
- Ripper – Single Shank Pushblock with Pin Puller
- Ripper – Single Shank with Pin Puller – Heavy
- Ripper – Multi Shank (three shank)
- Ripper – Multi Shank – Heavy (three shank)
- Ripper – Multi Shank Leach Pad with Pin Puller
- Ripper – Multi Shank – Coal (five shank)
- Counterweight – Rear
- Drawbar with Counterweight
-
- Blades
-
- Semi-Universal (27.2 m³/35.6 yd³)
- Universal (34.4 m³/45.0 yd³)
- Carrydozer (43.6 m³/57 yd³)
- Reclamation Universal (42 m³/55 yd³)
- Reclamation Universal (53.5 m³/70 yd³)
- Coal Universal (75 m³/98.0 yd³)
- Coal Universal (65 m³/85.5 yd³)
-
- Other
-
- Fire Suppression Ready
- Fire Suppression Installed