The Cat® D2 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.
|
|
|
|
|
|
|
|
Engine
- Engine Model
- Cat® C3.6
- Power - Net
- 92 hp
- Displacement
- 220 in³
- Net Power - 2,200 rpm - SAE J1349
- 92 hp
- Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
- 92 hp
- Note (1)
- Net power is tested per ISO 9,249:2,007 and SAE J1,349:2,011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
- Power Train
- Hydrostatic
- Note (2)
- All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2,014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Weights
- Operating Weight
- 18,382 lb
- Operating Weight
- 18,382 lb
- Operating Weight - LGP
- 19,066 lb
- Note (2)
- For machine with ripper, add 554 kg (1,222 lb).
- Note (1)
- Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Transmission
- Drive Pumps
- 1
- Maximum Travel Speed - Forward
- 5.6 mile/h
- Relief Valve Settings
- 7,033 psi
- Maximum Travel Speed - Reverse
- 6.2 mile/h
- Track Motors
- 2
Hydraulic Controls
- Pump Output
- 17.2 gal/min
- Relief Valve Settings
- 2,988 psi
Ripper
- Type
- Parallelogram
- Number of Shanks
- 3
- Height
- 6.5 in
- Weight
- 1,222 lb
- Maximum Digging Depth
- 13.3 in
- Maximum Ground Clearance Under Tip
- 17.6 in
- Overall Width
- 67.3 in
- Maximum Reach - Ground Line
- 30.2 in
Cab
- FOPS
- ISO 3,449:2,005 Level II
- ROPS
- ISO 3,471:2,008
Undercarriage
- Length - Track on Ground - LGP
- 89 in
- Track Gauge
- 61 in
- Number of Rollers - Each Side
- 7
- Track Gauge - LGP
- 68 in
- Ground Pressure - LGP
- 4.3 psi
- Shoe Width - Standard
- 18 in
- Shoe Width - LGP
- 25 in
- Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
- 43
- Number of Shoes - Each Side - Abrasion Undercarriage
- 38
- Ground Pressure
- 5.7 psi
- Length of Track on Ground
- 89 in
Service Refill Capacities
- Fuel Tank
- 51.5 gal (US)
- Crankcase - With Filter
- 2.8 gal (US)
- Final Drive - Each - LGP
- 2.6 gal (US)
- Cooling System
- 5 gal (US)
- Transmission - Hydraulic Tank
- 23.8 gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 4.9 gal (US)
- Final Drives - Each Side
- 2.6 gal (US)
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1,430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Dimensions
- BLADE: Digging Depth - LGP
- 23.2 in
- BLADE: Blade Cutting Edge Angle, Adjustable - LGP
- 52° to 58°
- BLADE: Blade Lift Height - LGP
- 27.9 in
- BLADE: Blade Width - LGP
- 124 in
- BLADE: Blade Width at Maximum Angle - LGP
- 113.1 in
- Track Gauge - LGP
- 67.9 in
- Ground Clearance - LGP
- 13 in
- BLADE: Blade Height - LGP
- 35.8 in
- Overall Length - With Blade - LGP
- 168.2 in
- BLADE: Blade Capacity (SAE) - LGP
- 2.42 yd³
- BLADE: Maximum Tilt - LGP
- 17.2 in
- BLADE: Maximum Angle (either side) - LGP
- 25°
- BLADE: Maximum Angle (either side) - Standard
- 25°
- Ground Clearance - Standard
- 13 in
- Overall Length - With Blade - Standard
- 168.5 in
- Note
- Abrasion Undercarriage
- BLADE: Blade Cutting Edge Angle, Adjustable - Standard
- 52° to 58°
- BLADE: Maximum Tilt - Standard
- 15.2 in
- Track Gauge - Standard
- 61 in
- BLADE: Digging Depth - Standard
- 23.3 in
- BLADE: Blade Width - Standard
- 109.5 in
- BLADE: Blade Lift Height - Standard
- 29.3 in
- BLADE: Blade Capacity (SAE) - Standard
- 2.59 yd³
- BLADE: Blade Width at Maximum Angle - Standard
- 100.1 in
- BLADE: Blade Height - Standard
- 39.8 in
- Note
- With Ripper Attachment (add to Length of Basic Dozer) - 1,177 mm (46.3 in)
- Length of Basic Dozer (without blade) - LGP
- 129.5 in
- Width of Dozer (standard shoes, no blade) - Standard
- 79.1 in
- Dozer Height - LGP
- 108.9 in
- Dozer Height - Standard
- 108.9 in
- Width of Dozer (standard shoes, no blade) - LGP
- 92.9 in
- Length of Basic Dozer (without blade) - Standard
- 129.5 in
Retrieval Winch
- Maximum Line Speed - Full Drum
- 79 ft/min
- Maximum Line Speed - Bare Drum
- 50 ft/min
- Weight
- 1,747 lb
- Drum Capacity - Optional Cable
- 195 ft
- Rope Diameter - Recommended
- 0.63 in
- Winch Drive
- Hydraulic
- Rope Diameter - Optional
- 0.75 in
- Drum Capacity - Recommended Cable
- 277 ft
- Maximum Line Pull - Full Drum
- 20,350 lb
- Speed
- Variable
- Maximum Line Pull - Bare Drum
- 32,150 lb
- Control
- Hydraulic
- Overall width
- 27.91 in
- Drum Width
- 9.65 in
- Drum Diameter
- 8 in
- Winch Length
- 35.63 in
- Throat Clearance
- 5.6 in
High Performance Winch
- Maximum line pull – bare drum
- 40,000 lb
- Drum capacity – recommended cable
- 371 ft
- Winch length
- 27.76 in
- Overall width
- 29.2 in
- Control
- Hydraulic
- Maximum line speed – bare drum
- 131 ft/min
- Maximum line speed – full drum
- 207 ft/min
- Drum width
- 10.8 in
- Drum capacity – optional
- 256 ft
- Throat clearance
- 6.75 in
- Weight
- 1,345 lb
- Rope diameter – recommended
- 0.63 in
- Speed
- Variable
- Maximum line pull – full drum
- 25,000 lb
- Drum diameter
- 10 in
- Rope diameter – optional
- 0.75 in
- Winch drive
- Hydrostatic
Standard Equipment:
-
- Power Train
-
- Air cleaner with precleaner, automatic dust ejection and under hood intake
- Aluminum bar plate cooling system (radiator, power train)
- Automatic traction control
- Cat C3.6 diesel engine
- Drive, auxiliary
- Dual path, closed loop, hydrostatic transmission
- Electric fuel pump
- Fuel/water separator
- Turbocharged aftercooled
-
- Electrical
-
- Alarm, backup
- Alternator, 150 amp, heavy duty
- Batteries, heavy duty, maintenance free, 1,000 CCA
- Diagnostic connector
- Four integrated front halogen lights, two rear halogen
- Horn, electric
- Starter, electric, 12 V, heavy duty
-
- Undercarriage
-
- Heavy Duty (HD) Undercarriage (43 section)
- Carrier rollers
- Guards, front/rear guiding
- Seven roller track frame
- Track adjusters, hydraulic
- Track rollers, lifetime lubricated
-
- Hydraulic
-
- Hydraulic pump and oil
- Single lever, three function control
- Three valve hydraulics
-
- Cat Technology
-
- Low Slip Traction Control (included with ARO and Cat Grade 3D)
- Slope Indicate
- Cat Product Link™ PLE643/PLE743 Cellular
- Third party 3D grade system compatible
- Stable Blade – Basic Lift
- Slope Indicate
-
- Attachments
-
- Rigid drawbar
- Front pull device
-
- Operator Environment
-
- Armrests, adjustable
- Coat hook
- Controls, seat mounted, fore/aft adjustment
- Cup holders
- Eco Mode
- Electronic Monitoring system with gauge:
– Chassis slope indication
– Diesel exhaust fluid (DEF)
– Engine coolant temperature
– Fuel level
– Hydraulic oil temperature - Electronic security system
- Engine air cleaner service indicator
- Engine RPM and gear display
- Floor mat, rubber, heavy duty
- Foot pads, dash
- Hour meter, electronic
- Independent forward/reverse speed settings
- Mirror, rearview, inside
- Power port, 12 volt
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, hi-vis retractable 76 mm (3")
- Seatbelt buckling indicator/reminder
- Single pedal combining decel and brake functions
- Speed recall
- Storage compartment
- Throttle switch, rotary
- Travel speed limiter, electronic
Optional Equipment:
-
- Power Train
-
- Air cleaner with external precleaner
- Installation, winch
-
- Electrical
-
- Four integrated front LED lights, two rear LED
-
- Undercarriage
-
- Abrasion Undercarriage (38 section)
- Track Pairs
– Track, 460 mm (18 in)
– Track, 635 mm (25 in)
-
- Hydraulic
-
- Four valve for use with ripper
- Four valve for use with winch
-
- Cat Technology
-
- Cat Grade with Slope Assist
- Cat Command Station (availability varies by region
- Cat Command Console (availability varies by region)
- Full-color 254 mm (10 in) touchscreen grade display
- Cat Product Link PLE683/PLE783 Cellular/Satellite
- Grade 3D with Assist includes:
– Same Assist with ARO features
– Steer Assist 3D
– Grade 3D - Assist with Attachment Ready Option (ARO) includes:
– Slope Indicate
– Blade Load Monitor
– Stable Blade Lift and Tilt
– Slope Assist
– Traction Control
– Steer Assist
– AutoCarry
-
- Attachments
-
- Drawbar, towing
- Machine security system
- Mounting, winch
- Ripper, parallelogram, includes three shanks and teeth
- Winch, hydraulic, high performance
- Winch, hydraulic, retrieval
-
- Operator Environment
-
- Power Pitch
- Cab, with air conditioning
- Cab, polycarbonate windows and air conditioning
- Radio, AM/FM Bluetooth®
- Seat, air suspended, cloth or vinyl
- Seat, air suspension, choice of:
– Vinyl, heated seat with heated controls
– Cloth, heated seat with heated controls
– Cloth, heated and ventilated seat with heated controls - Sound suppression
-
- Other
-
- Heater, engine, coolant 120 V/240 V
- Starting aid, ether
Specifications
Engine
- Engine Model
- Cat® C3.6
- Power - Net
- 92 hp
- Displacement
- 220 in³
- Net Power - 2,200 rpm - SAE J1349
- 92 hp
- Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
- 92 hp
- Note (1)
- Net power is tested per ISO 9,249:2,007 and SAE J1,349:2,011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
- Power Train
- Hydrostatic
- Note (2)
- All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2,014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Weights
- Operating Weight
- 18,382 lb
- Operating Weight
- 18,382 lb
- Operating Weight - LGP
- 19,066 lb
- Note (2)
- For machine with ripper, add 554 kg (1,222 lb).
- Note (1)
- Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Transmission
- Drive Pumps
- 1
- Maximum Travel Speed - Forward
- 5.6 mile/h
- Relief Valve Settings
- 7,033 psi
- Maximum Travel Speed - Reverse
- 6.2 mile/h
- Track Motors
- 2
Hydraulic Controls
- Pump Output
- 17.2 gal/min
- Relief Valve Settings
- 2,988 psi
Ripper
- Type
- Parallelogram
- Number of Shanks
- 3
- Height
- 6.5 in
- Weight
- 1,222 lb
- Maximum Digging Depth
- 13.3 in
- Maximum Ground Clearance Under Tip
- 17.6 in
- Overall Width
- 67.3 in
- Maximum Reach - Ground Line
- 30.2 in
Cab
- FOPS
- ISO 3,449:2,005 Level II
- ROPS
- ISO 3,471:2,008
Undercarriage
- Length - Track on Ground - LGP
- 89 in
- Track Gauge
- 61 in
- Number of Rollers - Each Side
- 7
- Track Gauge - LGP
- 68 in
- Ground Pressure - LGP
- 4.3 psi
- Shoe Width - Standard
- 18 in
- Shoe Width - LGP
- 25 in
- Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
- 43
- Number of Shoes - Each Side - Abrasion Undercarriage
- 38
- Ground Pressure
- 5.7 psi
- Length of Track on Ground
- 89 in
Service Refill Capacities
- Fuel Tank
- 51.5 gal (US)
- Crankcase - With Filter
- 2.8 gal (US)
- Final Drive - Each - LGP
- 2.6 gal (US)
- Cooling System
- 5 gal (US)
- Transmission - Hydraulic Tank
- 23.8 gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 4.9 gal (US)
- Final Drives - Each Side
- 2.6 gal (US)
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1,430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Dimensions
- BLADE: Digging Depth - LGP
- 23.2 in
- BLADE: Blade Cutting Edge Angle, Adjustable - LGP
- 52° to 58°
- BLADE: Blade Lift Height - LGP
- 27.9 in
- BLADE: Blade Width - LGP
- 124 in
- BLADE: Blade Width at Maximum Angle - LGP
- 113.1 in
- Track Gauge - LGP
- 67.9 in
- Ground Clearance - LGP
- 13 in
- BLADE: Blade Height - LGP
- 35.8 in
- Overall Length - With Blade - LGP
- 168.2 in
- BLADE: Blade Capacity (SAE) - LGP
- 2.42 yd³
- BLADE: Maximum Tilt - LGP
- 17.2 in
- BLADE: Maximum Angle (either side) - LGP
- 25°
- BLADE: Maximum Angle (either side) - Standard
- 25°
- Ground Clearance - Standard
- 13 in
- Overall Length - With Blade - Standard
- 168.5 in
- Note
- Abrasion Undercarriage
- BLADE: Blade Cutting Edge Angle, Adjustable - Standard
- 52° to 58°
- BLADE: Maximum Tilt - Standard
- 15.2 in
- Track Gauge - Standard
- 61 in
- BLADE: Digging Depth - Standard
- 23.3 in
- BLADE: Blade Width - Standard
- 109.5 in
- BLADE: Blade Lift Height - Standard
- 29.3 in
- BLADE: Blade Capacity (SAE) - Standard
- 2.59 yd³
- BLADE: Blade Width at Maximum Angle - Standard
- 100.1 in
- BLADE: Blade Height - Standard
- 39.8 in
- Note
- With Ripper Attachment (add to Length of Basic Dozer) - 1,177 mm (46.3 in)
- Length of Basic Dozer (without blade) - LGP
- 129.5 in
- Width of Dozer (standard shoes, no blade) - Standard
- 79.1 in
- Dozer Height - LGP
- 108.9 in
- Dozer Height - Standard
- 108.9 in
- Width of Dozer (standard shoes, no blade) - LGP
- 92.9 in
- Length of Basic Dozer (without blade) - Standard
- 129.5 in
Retrieval Winch
- Maximum Line Speed - Full Drum
- 79 ft/min
- Maximum Line Speed - Bare Drum
- 50 ft/min
- Weight
- 1,747 lb
- Drum Capacity - Optional Cable
- 195 ft
- Rope Diameter - Recommended
- 0.63 in
- Winch Drive
- Hydraulic
- Rope Diameter - Optional
- 0.75 in
- Drum Capacity - Recommended Cable
- 277 ft
- Maximum Line Pull - Full Drum
- 20,350 lb
- Speed
- Variable
- Maximum Line Pull - Bare Drum
- 32,150 lb
- Control
- Hydraulic
- Overall width
- 27.91 in
- Drum Width
- 9.65 in
- Drum Diameter
- 8 in
- Winch Length
- 35.63 in
- Throat Clearance
- 5.6 in
High Performance Winch
- Maximum line pull – bare drum
- 40,000 lb
- Drum capacity – recommended cable
- 371 ft
- Winch length
- 27.76 in
- Overall width
- 29.2 in
- Control
- Hydraulic
- Maximum line speed – bare drum
- 131 ft/min
- Maximum line speed – full drum
- 207 ft/min
- Drum width
- 10.8 in
- Drum capacity – optional
- 256 ft
- Throat clearance
- 6.75 in
- Weight
- 1,345 lb
- Rope diameter – recommended
- 0.63 in
- Speed
- Variable
- Maximum line pull – full drum
- 25,000 lb
- Drum diameter
- 10 in
- Rope diameter – optional
- 0.75 in
- Winch drive
- Hydrostatic
Standard/Optional Features
Standard Equipment:
-
- Power Train
-
- Air cleaner with precleaner, automatic dust ejection and under hood intake
- Aluminum bar plate cooling system (radiator, power train)
- Automatic traction control
- Cat C3.6 diesel engine
- Drive, auxiliary
- Dual path, closed loop, hydrostatic transmission
- Electric fuel pump
- Fuel/water separator
- Turbocharged aftercooled
-
- Electrical
-
- Alarm, backup
- Alternator, 150 amp, heavy duty
- Batteries, heavy duty, maintenance free, 1,000 CCA
- Diagnostic connector
- Four integrated front halogen lights, two rear halogen
- Horn, electric
- Starter, electric, 12 V, heavy duty
-
- Undercarriage
-
- Heavy Duty (HD) Undercarriage (43 section)
- Carrier rollers
- Guards, front/rear guiding
- Seven roller track frame
- Track adjusters, hydraulic
- Track rollers, lifetime lubricated
-
- Hydraulic
-
- Hydraulic pump and oil
- Single lever, three function control
- Three valve hydraulics
-
- Cat Technology
-
- Low Slip Traction Control (included with ARO and Cat Grade 3D)
- Slope Indicate
- Cat Product Link™ PLE643/PLE743 Cellular
- Third party 3D grade system compatible
- Stable Blade – Basic Lift
- Slope Indicate
-
- Attachments
-
- Rigid drawbar
- Front pull device
-
- Operator Environment
-
- Armrests, adjustable
- Coat hook
- Controls, seat mounted, fore/aft adjustment
- Cup holders
- Eco Mode
- Electronic Monitoring system with gauge:
– Chassis slope indication
– Diesel exhaust fluid (DEF)
– Engine coolant temperature
– Fuel level
– Hydraulic oil temperature - Electronic security system
- Engine air cleaner service indicator
- Engine RPM and gear display
- Floor mat, rubber, heavy duty
- Foot pads, dash
- Hour meter, electronic
- Independent forward/reverse speed settings
- Mirror, rearview, inside
- Power port, 12 volt
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, hi-vis retractable 76 mm (3")
- Seatbelt buckling indicator/reminder
- Single pedal combining decel and brake functions
- Speed recall
- Storage compartment
- Throttle switch, rotary
- Travel speed limiter, electronic
Optional Equipment:
-
- Power Train
-
- Air cleaner with external precleaner
- Installation, winch
-
- Electrical
-
- Four integrated front LED lights, two rear LED
-
- Undercarriage
-
- Abrasion Undercarriage (38 section)
- Track Pairs
– Track, 460 mm (18 in)
– Track, 635 mm (25 in)
-
- Hydraulic
-
- Four valve for use with ripper
- Four valve for use with winch
-
- Cat Technology
-
- Cat Grade with Slope Assist
- Cat Command Station (availability varies by region
- Cat Command Console (availability varies by region)
- Full-color 254 mm (10 in) touchscreen grade display
- Cat Product Link PLE683/PLE783 Cellular/Satellite
- Grade 3D with Assist includes:
– Same Assist with ARO features
– Steer Assist 3D
– Grade 3D - Assist with Attachment Ready Option (ARO) includes:
– Slope Indicate
– Blade Load Monitor
– Stable Blade Lift and Tilt
– Slope Assist
– Traction Control
– Steer Assist
– AutoCarry
-
- Attachments
-
- Drawbar, towing
- Machine security system
- Mounting, winch
- Ripper, parallelogram, includes three shanks and teeth
- Winch, hydraulic, high performance
- Winch, hydraulic, retrieval
-
- Operator Environment
-
- Power Pitch
- Cab, with air conditioning
- Cab, polycarbonate windows and air conditioning
- Radio, AM/FM Bluetooth®
- Seat, air suspended, cloth or vinyl
- Seat, air suspension, choice of:
– Vinyl, heated seat with heated controls
– Cloth, heated seat with heated controls
– Cloth, heated and ventilated seat with heated controls - Sound suppression
-
- Other
-
- Heater, engine, coolant 120 V/240 V
- Starting aid, ether